|
|
Hydrodynamic analysis of basic equipment in units for the thermal processing of wastes
Říha, Kamil ; Kilkovský, Bohuslav (referee) ; Pařízek, Tomáš (advisor)
Thermal processing of wastes is a metod, when during combustion occur reduction of wastes till 10% previous volume. The main advantage of this method is possibility to heat utilization for heat and electric production. Through thermic process develops range of pollutants (NOx, CO, SO2, HCl, HF, PCDD/F) that had to be remove from off-gas or reduced to enviromental values in agreement with laws in force [16]. For this purpose are combustion units equip with range of devices for removing this pollutans. The main task of this diploma thesis is selectoin of ctirical device in term of pressure drops. The value of pressure drop stands significant part in proposition of efficiecy off-gas fan. In increase or decrease total pressure drop consumption of electrical energy of off-gas fan is rising or going down. Change of consumption in total classification is projecting in energy utilization rate of waste where is determinate if it stands of energy utilizatoin or just incineration. In first part of diploma thesis are described in detail availability methods of off-gas cleaning where is described their principle, advanteges, disadvatages and comparison of effectivity. In second part of diploma thesis is made example model about influnce technology on value of total pressure drop. There were chosen two technologies for removing dioxins (technology of catalytic filtration REMEDIA and DeNox/DeDiox). For both technologies were made detailed analysis of pressure drops single components of these technologies. Attainment results were compared and rated with one another. For analysis these two methods were designed mathematical process in software Maple 9.5.
|
|
|
Incineration plant of middle treatment capacity – flue gas cleaning system
Krejčí, Tomáš ; Kropáč, Jiří (referee) ; Bébar, Ladislav (advisor)
Analysis of the regional energy supply, shows that suitable alternative may be a combination of primary energy sources with the municipal solid waste to energy plant. Starting from the fact that the regional thermal energy needs are characterized by smaller power demand, but relatively significant seasonal fluctuations in heat supply. These factors limit the processing performance of the considered waste to energy plant that could be included in the system of regional energy supply. The aim of the thesis was to propose adequate treatment capacity for regional waste to energy plant and explore alternative solutions in off-gas cleaning for exhaust gases generated during incineration of MSW. The balance sheets of two alternative solutions off gas cleaning are part of the thesis, both in terms of material and energy consumption. Presented evaluation of economic demands alternative arrangement of off gas cleaning includes operating costs and the impact on earnings from energy production.
|
|
|
Absorption Cleaning of Flue Gases Arising from the Incineration of Wastes
Jecha, David ; Klemeš,, Jiří (referee) ; Žaloudík, Petr (referee) ; Bébar, Ladislav (advisor)
This doctoral thesis deals with potentials of methods for cleaning of flue gas from pollutants such as acidic components. Wet method of flue gas cleaning is analysed in detail with special focus on elimination of sulphur dioxide (SO2). Introduction presents advantages and disadvantages of thermal processing of waste and production of undesired pollutants. Following parts comprise facts about main pollutants produced from incineration. Legislation providing for emission of gaseous pollutants from incinerators is also given. Chapter concerning methods of pollutants elimination is mostly focused on absorption (wet and/or semidry scrubber) and adsorption methods. Several up-to-date technological procedures are mentioned; they have a multifunctional effect such as elimination of acidic components, heavy metals, polychlorinated dibenzo-p-dioxines and dibenzo-furanes from flue gas using single injection of suspense. Elimination of mercury (Hg) is among the technologies for heavy metal elimination which is described in detail. Main part of the thesis is related to experiments at two-stage flue gas cleaning equipment. Function of this experimental unit is described along with methods for measurement of individual quantities and detailed description of all the equipment and its components. Experimental measurements carried out at this equipment are explicated and assessed. Along with experimental work, the author has created a simulation model of wet flue gas cleaning in ChemCad programme. Particular operational parameters were tested on this model. This thesis contains results of the measurement which provide background for verification of the mathematical model. Further, the balance of heavy metals conducted on the basis of measurements in waste incinerator is displayed. Main contribution of the thesis may be summed up as follows: Author has designed and constructed experimental equipment for two stage flue gas cleaning. He also formed calculation for pressure drop of O-element prototype equipment and for packing column with FLEXIPAC structured packing. He created data file with measurements at the experimental unit. He determined temperature at outlet of a random device where liquid is injected into stream of hot flue gas. He designed a simulation model which is identical with experimental equipment and which usage enabled comparison of measured and calculated data; it also serves as a basis for industrial applications. Last part deals with creation off heavy metals balance in a case industrial waste incinerator.
|
|
|
Evaluation of the alternatives of PCDD/F removing in the incineration plants
Frýba, Lukáš ; Kropáč, Jiří (referee) ; Bébar, Ladislav (advisor)
The thesis is focused on analyzing the current status of the technology used for cleaning flue gas from persistent organic pollutants, especially PCDD/F. For the three most commonly used methods of solution operational and energy efficiency comparison was made, where achievable energy export and the impact of the change in working conditions on the efficiency indicators of energy production and use of the energy was evaluated. In conditions we considered an alternative machine-technological solutions used for the final disposal of persistent organic pollutants resulting from the waste combustion in terms of additional operating costs and energy efficiency.
|
|
|
Absorption Cleaning of Flue Gases Arising from the Incineration of Wastes
Jecha, David ; Klemeš,, Jiří (referee) ; Žaloudík, Petr (referee) ; Bébar, Ladislav (advisor)
This doctoral thesis deals with potentials of methods for cleaning of flue gas from pollutants such as acidic components. Wet method of flue gas cleaning is analysed in detail with special focus on elimination of sulphur dioxide (SO2). Introduction presents advantages and disadvantages of thermal processing of waste and production of undesired pollutants. Following parts comprise facts about main pollutants produced from incineration. Legislation providing for emission of gaseous pollutants from incinerators is also given. Chapter concerning methods of pollutants elimination is mostly focused on absorption (wet and/or semidry scrubber) and adsorption methods. Several up-to-date technological procedures are mentioned; they have a multifunctional effect such as elimination of acidic components, heavy metals, polychlorinated dibenzo-p-dioxines and dibenzo-furanes from flue gas using single injection of suspense. Elimination of mercury (Hg) is among the technologies for heavy metal elimination which is described in detail. Main part of the thesis is related to experiments at two-stage flue gas cleaning equipment. Function of this experimental unit is described along with methods for measurement of individual quantities and detailed description of all the equipment and its components. Experimental measurements carried out at this equipment are explicated and assessed. Along with experimental work, the author has created a simulation model of wet flue gas cleaning in ChemCad programme. Particular operational parameters were tested on this model. This thesis contains results of the measurement which provide background for verification of the mathematical model. Further, the balance of heavy metals conducted on the basis of measurements in waste incinerator is displayed. Main contribution of the thesis may be summed up as follows: Author has designed and constructed experimental equipment for two stage flue gas cleaning. He also formed calculation for pressure drop of O-element prototype equipment and for packing column with FLEXIPAC structured packing. He created data file with measurements at the experimental unit. He determined temperature at outlet of a random device where liquid is injected into stream of hot flue gas. He designed a simulation model which is identical with experimental equipment and which usage enabled comparison of measured and calculated data; it also serves as a basis for industrial applications. Last part deals with creation off heavy metals balance in a case industrial waste incinerator.
|
|
|
Incineration plant of middle treatment capacity – flue gas cleaning system
Krejčí, Tomáš ; Kropáč, Jiří (referee) ; Bébar, Ladislav (advisor)
Analysis of the regional energy supply, shows that suitable alternative may be a combination of primary energy sources with the municipal solid waste to energy plant. Starting from the fact that the regional thermal energy needs are characterized by smaller power demand, but relatively significant seasonal fluctuations in heat supply. These factors limit the processing performance of the considered waste to energy plant that could be included in the system of regional energy supply. The aim of the thesis was to propose adequate treatment capacity for regional waste to energy plant and explore alternative solutions in off-gas cleaning for exhaust gases generated during incineration of MSW. The balance sheets of two alternative solutions off gas cleaning are part of the thesis, both in terms of material and energy consumption. Presented evaluation of economic demands alternative arrangement of off gas cleaning includes operating costs and the impact on earnings from energy production.
|
|
|
Evaluation of the alternatives of PCDD/F removing in the incineration plants
Frýba, Lukáš ; Kropáč, Jiří (referee) ; Bébar, Ladislav (advisor)
The thesis is focused on analyzing the current status of the technology used for cleaning flue gas from persistent organic pollutants, especially PCDD/F. For the three most commonly used methods of solution operational and energy efficiency comparison was made, where achievable energy export and the impact of the change in working conditions on the efficiency indicators of energy production and use of the energy was evaluated. In conditions we considered an alternative machine-technological solutions used for the final disposal of persistent organic pollutants resulting from the waste combustion in terms of additional operating costs and energy efficiency.
|
|
|
Hydrodynamic analysis of basic equipment in units for the thermal processing of wastes
Říha, Kamil ; Kilkovský, Bohuslav (referee) ; Pařízek, Tomáš (advisor)
Thermal processing of wastes is a metod, when during combustion occur reduction of wastes till 10% previous volume. The main advantage of this method is possibility to heat utilization for heat and electric production. Through thermic process develops range of pollutants (NOx, CO, SO2, HCl, HF, PCDD/F) that had to be remove from off-gas or reduced to enviromental values in agreement with laws in force [16]. For this purpose are combustion units equip with range of devices for removing this pollutans. The main task of this diploma thesis is selectoin of ctirical device in term of pressure drops. The value of pressure drop stands significant part in proposition of efficiecy off-gas fan. In increase or decrease total pressure drop consumption of electrical energy of off-gas fan is rising or going down. Change of consumption in total classification is projecting in energy utilization rate of waste where is determinate if it stands of energy utilizatoin or just incineration. In first part of diploma thesis are described in detail availability methods of off-gas cleaning where is described their principle, advanteges, disadvatages and comparison of effectivity. In second part of diploma thesis is made example model about influnce technology on value of total pressure drop. There were chosen two technologies for removing dioxins (technology of catalytic filtration REMEDIA and DeNox/DeDiox). For both technologies were made detailed analysis of pressure drops single components of these technologies. Attainment results were compared and rated with one another. For analysis these two methods were designed mathematical process in software Maple 9.5.
|
guest ::
